Description
SySTOR, SYS609DP, 1 to 9 SATA 600MB/S HDD SSD Duplicator/Sanitizer – 3.5″ & 2.5″ Hard Disk Drive / Solid State Drive Dual Port Hot Swap
Features:
- 3.5″ Sata HDD – 3.5″ Sata HDD – Supported
- 3.5″ Sata HDD – 2.5″ Sata HDD – Supported
- 2.5″ Sata HDD – 3.5″ Sata HDD – Supported
- 2.5″ Sata HDD – 3.5″ Sata HDD – Supported
- General Feature:
- User-friendly LCD display interface
- Easy operation without extra hardware, software and training not required
- Automatic system self-diagnostics when powered on
- Copy, Compare, PreScan, and DoD Compliant Erase functions
- Main Copying Features:
- System and Files: Copies only the device’s data sector instead of the entire capacity
- Whole HDD: Copies the device’s entire capacity bit by bit, sector by sector
- Percentage (%): Copies the selected range of the source’s total capacity, starting from the initial sector
- All Partitions: Copy or skip HPA, DCO, unknown partitions, modified formats, etc. defined by settings
- Main HDD Sanitizing/Erasing Features:
- Quick Erase: Erases the table of contents of file system of target hard drives
- Full Erase: Erases the target hard drive’s total capacity bit by bit by adding 0s to each bit of each sector
- Secure Erase: Deletes and replaces the entire target hard drive data with zero strings, permanently wiping sensitive data to counter data remanence.
- DoD Erase: Complies with DoD 5220 standard to fully erase the target hard drive by rewriting bit by bit three times to guarantee data is permanently deleted
- Note: Copying speed will vary depending on hard drive speed.
- Hardware Feature:
- Complete standalone, NO software required.
- Up to 10TB on maximum hard drive capacity
- Fits both 3.5″ and 2.5″ hard drives without the need of an adapter.
- Copy multiple hard disk drives or solid state drives simultaneously at speeds up to 600MB per second “Copying speed will vary depending on hard drive speed.”
- Transfer speed will vary depending on speed of hard disk drive used in the system
- HDD SSD sanitization/erase feature is DoD 5220.22-M data sanitation compliant
| Device Type | Dual Port |
| Transfer Rate | Up to 600Mb/s |
| HDD Size Limit | Up to 10TB |
| Support Form Factor | 3.5″ SATA HDD/SSD and 2.5″ SATA HDD/SSD |
| Supported File Systems | Windows: FAT16/FAT32/NTFS; Linux: Ext2/Ext3; Mac: HFS |
| Writing Mode | Sector by Sector, Fast Copy, Full Copy, Percentage Copy |
| Erase Modes | Quick Erase, Full Erase, DoD erase, Secure Erase |
| Interfaces | Serial ATA (SATA) |
| Load Type | Slot Loading |
| Display | LCD display |
| Color | Black |
| Operating Temperature | 0F to 104F |
| Operating Humidity | 15% to 90% (non-condensing) |
| Power Requirements | 100 ~ 240V AC |






Reviews
There are no reviews yet.