Description
INTRODUCTION
This U.S. Solid 5 way 2 Position Pneumatic Electric Solenoid Valve is a switch for routing air to any pneumatic device, usually an actuator, allowing a relatively small signal to control a large device. It is also the interface between electronic controllers and pneumatic systems. This valve allows pneumatic control of position, flow, pressure and temperature.This is a 5/2 valve which means it has 5 ports; 2 exhaust ports through which air is regulated as it flows out, 2 power ports that power the system, 1 supply port for the inlet of air pressure, and 2 flow positions. This valve is made with an aluminum alloy. The valve’s mounting holes are through holes with a dimension of 4.3mm×2.
FEATURES
APPLICATIONS
SPECIFICATIONS
| Model | USS-PSV00034 | Brand | U.S. Solid |
|---|---|---|---|
| Size | 1/4″ | Flow Aperture | 16 mm |
| Valve Material | Aluminum Alloy | Valve Type | 5 way 2 position |
| Rated Voltage | DC 12 V ± 10% | Current | 0.33 A |
| Power Rating | 4 W | Applicable Media | Filtered Air |
| Level of protection | IP65 | Flow Value | 0.89 Cv |
| Working Pressure | 0.15 ~ 0.8 Mpa | Operating Temperature | -5°C – 50°C |
| Maximum Operational temperature | NPT | Operating State | Normally Closed |
HOW to WIRE
INSTALLATION
Our valves utilize two standard types of mounting holes to ensure secure and versatile installation: the Through Hole and the Threaded Hole.
Through Hole: This is a smooth, unthreaded hole designed to allow the body of a screw or bolt to pass freely through the valve’s mounting flange. Because it lacks threads, installation requires a separate nut and washer to be placed on the opposite side of the mounting surface, which securely clamps the valve in place. Our through holes come in two common sizes: 4.3mm x 2 and 3.3mm x 2. Please check your product specifications to confirm the exact dimensions.
Threaded Hole: This hole features internal threads (taps) matching a specific screw size, effectively acting as its own nut. It is designed to receive a corresponding machine screw or bolt directly, requiring you to simply insert and tighten the screw. This is ideal for installations where accessing or placing a separate nut on the reverse side is impossible or impractical. Our through holes come in one common size: M4x0.7×2. Please check your product specifications to confirm the exact dimensions.
Valve Attributes
Ingress – Protection Rating:
The valves have an ingress – protection rating of IP65. The first digit 6 indicates complete dust – tightness. The second digit 5 means protection against water jets from any direction. They are suitable for a variety of complex environments, effectively resisting the intrusion of dust and water to ensure reliable operation.
FAQ
1. What is the Waterproof Rating of this valve?
The motor’s housing is rated at IP65 for ingress protection. If permanently installed outdoors, it is recommended to place it under a shelter or in a protective box to prevent prolonged exposure to rain.
2. Can these solenoid valves be used continuously for extended periods?
These valves should be energized for less than 8 hours. While most do not exceed 18W of power, the coils are in a contained area and can burn out if energized for too long. We recommend using a computer fan to keep the coil cool if continuous operation is necessary.
3.How long should you wait between two consecutive five-hour uses of our solenoid valve?
It is recommended to allow about 20 minutes of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.
4.Can this be used for Drinking Water?
YES. This motorized ball valve is made of Aluminum Alloy, which is lead – free and suitable for use in drinking water systems.
5.Can it be used outdoors?
While the solenoid valves have an IP65 rating, making them resistant to water spray, it is recommended to enclose the valve in a protective housing if permanently installed outdoors to ensure long-term durability.
Download user manual here.
INTRODUCTION
This U.S. Solid 5 way 2 Position Pneumatic Electric Solenoid Valve is a switch for routing air to any pneumatic device, usually an actuator, allowing a relatively small signal to control a large device. It is also the interface between electronic controllers and pneumatic systems. This valve allows pneumatic control of position, flow, pressure and temperature.This is a 5/2 valve which means it has 5 ports; 2 exhaust ports through which air is regulated as it flows out, 2 power ports that power the system, 1 supply port for the inlet of air pressure, and 2 flow positions. This valve is made with an aluminum alloy. The valve’s mounting holes are through holes with a dimension of 4.3mm×2.
FEATURES
APPLICATION
SPECIFICATIONS
| Model | USS-PSV00034 | Brand | U.S. Solid |
|---|---|---|---|
| Size | 1/4″ | Flow Aperture | 16 mm |
| Valve Material | Aluminum Alloy | Valve Type | 5 way 2 position |
| Rated Voltage | DC 12 V ± 10% | Current | 0.33 A |
| Power Rating | 4 W | Applicable Media | Filtered Air |
| Level of protection | IP65 | Flow Value | 0.89 Cv |
| Working Pressure | 0.15 ~ 0.8 Mpa | Operating Temperature | -5°C – 50°C |
| Maximum Operational temperature | NPT | Operating State | Normally Closed |
HOW to WIRE
INSTALLATION
Our valves utilize two standard types of mounting holes to ensure secure and versatile installation: the Through Hole and the Threaded Hole.
Through Hole: This is a smooth, unthreaded hole designed to allow the body of a screw or bolt to pass freely through the valve’s mounting flange. Because it lacks threads, installation requires a separate nut and washer to be placed on the opposite side of the mounting surface, which securely clamps the valve in place. Our through holes come in two common sizes: 4.3mm x 2 and 3.3mm x 2. Please check your product specifications to confirm the exact dimensions.
Threaded Hole: This hole features internal threads (taps) matching a specific screw size, effectively acting as its own nut. It is designed to receive a corresponding machine screw or bolt directly, requiring you to simply insert and tighten the screw. This is ideal for installations where accessing or placing a separate nut on the reverse side is impossible or impractical. Our through holes come in one common size: M4x0.7×2. Please check your product specifications to confirm the exact dimensions.
Valve Attributes
Ingress – Protection Rating:
The valves have an ingress – protection rating of IP65. The first digit 6 indicates complete dust – tightness. The second digit 5 means protection against water jets from any direction. They are suitable for a variety of complex environments, effectively resisting the intrusion of dust and water to ensure reliable operation.
FAQ
1. What is the Waterproof Rating of this valve?
The motor’s housing is rated at IP65 for ingress protection. If permanently installed outdoors, it is recommended to place it under a shelter or in a protective box to prevent prolonged exposure to rain.
2. Can these solenoid valves be used continuously for extended periods?
These valves should be energized for less than 8 hours. While most do not exceed 18W of power, the coils are in a contained area and can burn out if energized for too long. We recommend using a computer fan to keep the coil cool if continuous operation is necessary.
3.How long should you wait between two consecutive five-hour uses of our solenoid valve?
It is recommended to allow about 20 minutes of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.
4.Can this be used for Drinking Water?
YES. This motorized ball valve is made of Aluminum Alloy, which is lead – free and suitable for use in drinking water systems.
5.Can it be used outdoors?
While the solenoid valves have an IP65 rating, making them resistant to water spray, it is recommended to enclose the valve in a protective housing if permanently installed outdoors to ensure long-term durability.
Download user manual here.
Reviews
There are no reviews yet.